| Moonlight Fangs http://www.moonlight-fangs.de/ |
|
| DC1440-K(φ360mm) Metal Lathe http://www.moonlight-fangs.de/viewtopic.php?f=14&t=28485 |
Seite 1 von 1 |
| Autor: | olacacuhyxucutiped [ Do 12. Nov 2020, 05:00 ] |
| Betreff des Beitrags: | DC1440-K(φ360mm) Metal Lathe |
MODELS DC1440-K CAPACITY Max.swing over bed Ф356mm (14") Max.swing over carriage Ф210mm (8-1/5") Max. swing over gap Ф508mm (20") Width of bed 260mm (10-1/5") Distance between centers 1000(40") SPINDLE Spindle bore Ф40mm (1-1/2") Taper bore of spindle M.T.NO.5 Steps of spindle speed 12 Range of spindle speed 40~1800rpm Spindle nose D4 FEED Range of longitudinal feeds 0.043-0.653 (0.0012″~0.0294″) Range of cross feeds 0.024-0.359 (0.0004″~0.0103″) THREADING Metric threads 0.4-7mm/ 37kinds 0.45-7.5mm/ 23kinds Whit-worth threads 4-56TPI/ 28kinds 4-112TPI/ 40kinds LEADSCREW Diameter of leadscrew Ф22mm (7/8") Pitch threads of leadscrew 4mm or 8TPI TAILSTOCK Travel of tailstock quill 120mm (4-3/4") Diameter of tailstock quill Ф45mm (1-25/32") Taper bore of tailstock quill M.T.NO.3 POWER Power of main motor 2.4kw(3HP), 3Ph, 4P, 60Hz, 230V Coolant pump motor power 0.04kw(0.055HP) OTHERS Dimension(L×W×H) 1900×710×1170mm Net weight 1250kg (2750lbs) Gross weight 1380kg (3040lbs) ? http://www.miumac.com/miumac-product/manual-lathe/dc1440-k-360mm-metal-lathe.html |
|
| Seite 1 von 1 | Alle Zeiten sind UTC |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|